FAQ

We get a lot of the same questions, so here are a few quick answers all in one place!

Personally, we have been using GardStar 40% EC. There are several products that can be used, so here’s a great reference chart with mix rates for cattle oilers and rubbers: Cattle Rub Insecticide Chart – Valley Vet Supply

Always follow the label directions for the product you are using.

No. Our oilers are wick-fed, and the wicks will not wick water. They need an oil-based mixture to properly feed the wicks.

For the very first fill, it’s important to completely fill the tanks — or even fill them a little over — to get the wicks properly primed and going. After that, you can refill as needed.

The Complete Cattle Saver can comfortably handle 60 pairs (60 cows with calves).

The bigger the diameter, the more flow you will get. Smaller diameter = less flow.

Our wicks are the same price per foot, regardless of size.

We offer:
• 1/4″ – less flow
• 5/16″
• 3/8″
• 1/2″ – more flow

Standard sizes:

  • Complete Cattle Saver: 3/8″
  • 3′ Walkway: 3/8″
  • L-5 Mineral Feeder: 5/16″
  • Scratcher assemblies: 1/2″

If you’re using a thicker oil or dealing with cooler temperatures, go with 3/8″ or 1/2″.

Approximate capacities:

  • Complete center tank: 15 gallons
  • 3′ walkway & square scratcher jug: 5 gallons each
  • Complete Cattle Saver total: approximately 25 gallons
  • L-5 Mineral Feeder: approximately 2.5–3 gallons

No problem! Visit our Assembly page to watch our setup videos. They walk you through how to properly set up your Easy Way unit and get it ready to use.